Air Classifier Mill's application is very wide from food, chemical, and pharmaceutical...etc. It is also called ACM Grinder or Air Classifying Mill. It can grind most dry raw material into 60~2500 mesh.
Working Method of BS Air classifier mill
Raw material is fed into the mill by a small screw feeder, then, they will be cut and milled by the hammers inside.
There is air classifier inside the mill chamber.
Powder fine enough will be discharged.
Powder not fine enough will be milled in mill chamber until it is fine enough to pass the air classifier.
Air Classifier Mill's application is very wide from food, chemical, and pharmaceutical...etc. It is also called ACM Grinder or Air Classifying Mill.
It can grind most dry raw material into 60~2500 mesh.
◪ This machine has no sieves or screens in mill chamber, to change the powder size, just set the parameter on cotrol box
◪ This machine's application is very wide, it can grind food, chemical, and pharmaceutical products...etc.
Technical data of our BSP ACM grinder
|Input size(mm)||< 15||< 15||< 15||< 15|
|Speed of principle axis (rpm)||-6500||-5600||-4400||-3100|
|Grading impeller speed(rpm)||4000||4000||3500||3000|
About the hammer knife in our ACM mill, there are two types,
the first picture is good for grinding hard materials like herbs, rice
Another type knife is good for grinding crystal material like sugar, like some chemical raw materail.
More picture of BSP air classifying mill
Copyright © 2021 Brightsail Industries Group Co., Ltd. - All Rights Reserved.